Diesel electric power generator IPG13
- Prime Power:
12.5 Kva
10 Kw - Stand-by Power:
14 Kva
11.2 Kw - Perkins engine
- Leroy Somer alternator
- Specifications
- Engine
- Benefits & Features
- Warranty & After sales service
Type | Diesel |
---|---|
Prime Power Kva/Kw | 12.5/10.0 |
Stand-by Power Kva/Kw | 14.0/11.2 |
Voltage / Frequency | 400 V / 50 Hz |
Perkins Engine | 403A-15G1 |
Series | 400 Series |
Fuel Tank Capacity (Ltrs) | 50 |
Approximate Weight net (Kg) | 384 |
Dimensions L X W X H cm | 130/52/132 |
The Perkins 403 range of electric power (EP) engines delivers the same compact benefits of its 2 cylinder stablemate, but takes a stride forward in terms of noise, refinement and power. The 3 cylinder range offers excellent power density and superb fuel economy and is designed to meet your power generation needs in both unregulated territories where extreme conditions are likely, and higher regulated territories with more stringent emissions standards.
- 403A-15G ELECTROPAK
- 1.5 litre
- 13-20 kVA
The 403A-15G ElectropaK is a powerful but quiet 1.5 litre naturally aspirated 3 cylinder package that is designed for use in unregulated territories.
403A-15G standard equipment:
Air inlet system
- Mounted air filter
Control system
- 12 volt Electronic Shut Off Solenoid (ESOS) energised to run
- 12 volt starter motor and 12 volt 15 amp alternator with DC output
- Glow plug cold start aid and heater/starter switch
- Oil pressure and coolant temperature switches
Cooling system
- Thermostatically-controlled system with belt driven coolant pump and pusher fan
- Mounted radiator, piping and guards
Flywheel and flywheel housing
- Flywheel housing SAE 4 long
- High inertia flywheel to SAE J620 Size 190.5 mm (7½ in) heavy
Fuel system
- Mechanically governed cassette type fuel injection pump
- Split element fuel filter
General
- Front and rear engine mounting brackets
Oil system
- Spin-on full flow lubrication oil filter
- Wet steel sump with filler and dipstick
Compact and flexible
When you need power and reliability in a compact application, you can trust the 400 Series EP engines to deliver. Our engineers have carefully designed every component to minimise space. This can come in particularly handy in higher regulated territories where you need to consider size and space for aftertreatment solutions. Some models in the series also offer the convenience of switching between engine speeds and electrical frequencies to match your application and territory perfectly.
Efficient, quiet and powerful
The pressure on end users to reduce the fuel consumption of their machinery favours the 3 cylinder 403. Its power density, durability, fuel efficiency and quiet operation set it apart from similar sized competitors’ engines. The 403 range’s quiet operation makes it an excellent option where noise is a concern, particularly if you’re operating in urban areas.
Lower operating costs
The reliability of the 403 range, its uncomplicated indirect injection fuel system, ease of installation and warranty offering all combine to keep your ownership costs to a minimum. As the 400 Series is built on a common engine platform, you can also upgrade easily and affordably.